如何辨别自動上料攪拌車濾芯好壞 - 行業資訊_自動混凝土攪拌機知識-山東山汽工程機械（集團）有限公司

站内搜索

自動混凝土攪拌機知識

公司新聞行業資訊

熱點推薦

平口自上料攪拌車壓力不足怎麼辦？

2021-12-03

如何解決自上料攪拌車零配件的噪音問題？

2021-03-31

自動攪拌車相比于傳統攪拌車優勢

2022-02-09

中科聚峰：自動混凝土攪拌機突然熄火怎麼辦？

2020-08-05

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

如何辨别自動上料攪拌車濾芯好壞

所屬分類：行業資訊發布時間：2022-04-27 來源：http://jstengda.cn/ 浏覽量：18

今天我們會為大家帶來如何辨别自動上料攪拌車濾芯好壞，

Today we will show you how to distinguish the filter element of automatic feeding mixer truck,

1、看材質，材質是覺得濾芯好壞的決定因素，好的材質具有耐腐蝕，耐壓，阻力小等特點。如高分子纖維的意大利産質量非常可靠。

1. The quality of the filter element is determined by its material and resistance to corrosion. For example, the Italian production quality of polymer fiber is very reliable.

2、觀察濾筒的端蓋和金屬的接觸是不是嚴絲合縫。

2. Observe whether the contact between the end cover of the filter cartridge and the metal is tight.

3、看自動上料攪拌車濾芯是否可以循環使用，能不能用水清洗，使用壽命大概多久。

3. Check whether the filter element of the automatic feeding mixer can be recycled, whether it can be cleaned with water and how long its service life is.

4、考慮自動上料攪拌車的濾芯精度和透氣性如何。

4. Consider the accuracy and air permeability of the filter element of the automatic feeding mixer.

我們通常根據物料的顆粒大小進行選擇，對于顆粒較大的物料，可選擇過濾精度較大的過濾器，反之對于顆粒較小的粉末或者納級物料的話，則一定要選擇高精度的過濾器了。這樣才能實現自動上料攪拌車無塵化操作自動，如何辨别自動上料攪拌車濾芯好壞達到提高産品質量的目的。

If the particle size is high, we can choose the filter for the larger particle size. On the contrary, we can choose the filter for the larger particle size. In this way, the dust-free operation of the automatic feeding mixer can be realized. How to distinguish the quality of the filter element of the automatic feeding mixer, so as to improve the product quality.

1、上下料時間參數不合理：自動上料機因料倉内無法加裝料位機，所以行業基本都有時間控制。如何設置時間參數，上下料時間設置其實很簡單，在初次使用時，先設置一個小的時候，然後根據每次吸料位置慢慢加，當達到料位達到吸料口的時間，再減去一秒就是合理時間。放料時間是确保放完料再加一秒。這樣做有兩個好處：一是料位太高對濾芯傷害特别大，二是每次料都能放幹淨。

1. Unreasonable loading and unloading time parameters: since the automatic loading machine cannot be equipped with a material level machine in the silo, the industry basically has time control. How to set the time parameter? The setting of loading and unloading time is actually very simple. In the first use, set an hour first, and then slowly add it according to each suction position. When the material level reaches the suction port, subtract one second to be the reasonable time. The discharging time is to ensure that one second is added after discharging. This has two advantages: one is that the material level is too high, which is particularly harmful to the filter element, and the other is that the material can be cleaned every time.

2、自動上料攪拌車進料口給料量是否合理：正确的方式是物料在吸料口和空氣形成一定的氣物混合比，在氣流的推動下均勻流入上料機。這個時候我們需要将料槍設計帶有補氣功能。如果物料積壓時間過長可能很硬，這個時候需要在料槍上裝一個振蕩器，敲碎結塊的物料。

2. Whether the feeding amount at the feeding port of the automatic feeding mixer is reasonable: the correct way is that the materials form a certain gas-solid mixing ratio between the suction port and the air, and flow evenly into the feeding machine under the promotion of the air flow. At this time, we need to design the material gun with air replenishment function. If the material backlog is too long, it may be very hard. At this time, an oscillator needs to be installed on the material gun to break the caked materials.

以上就是為大家介紹的有關自動混凝土攪拌車的詳細介紹,希望對您有所幫助.如果您有什麼疑問的話,歡迎聯系我們.我們将以專業的态度,為您提供服務http://jstengda.cn

The above is the detailed introduction of automatic concrete mixer for you. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://jstengda.cn

上一頁：混凝土運輸攪拌車尾部防漏鬥下一頁：連續式攪拌機和間歇式攪拌機的區别

熱門産品 / HOT PRODUCT